By Claudie Ulysse. Electrical Wiring. Publised at Saturday, January 27th 2018, 10:46:17 AM. Electricity is supplied to your home through your electric utility’s overhead or buried power lines. Before entering your home, electricity passes through a watt-hour meter which measures the amount of electricity used.
By Linda Cerise. Electrical Wiring. Publised at Sunday, September 17th 2017, 09:47:57 AM. The terminations of shielded or screened conductors should be terminated so that the screen cannot fray. If the screen is to be connected then make it off in the same way as for coaxial cable with a soldered pigtail and a sleeve.
By Sylviane Marcelline. Electrical Wiring. Published at Tuesday, January 23rd 2018, 02:21:59 AM. In general, contactors should be kept away from electronic devices. A highly disturbing device (variable speed drive, frequency converter, etc.) will have less radiation in the panel if it is “encapsulated” in a small, electromagnetically sealed, unpainted metal enclosure.
By Blandine Honorine. Electrical Wiring. Published at Tuesday, January 23rd 2018, 01:20:46 AM. After successful completion, the troubleshooter can improve their understanding of DC, AC, three phase circuits, Relays, Contactors, PLC, Electronics, and other related technology.
By Blandine Honorine. Engine Wiring. Published at Monday, January 22nd 2018, 23:17:50 PM. They are heavy. In most applications today their power to weight ratio is not considered impressive. But when they power 4 wheeled machines such as Lawn and Garden Tractors, Skidsteers, and Road Grading Machines, you want that weight to aid in delivering that power to the ground.
By Blandine Honorine. Electrical Wiring. Published at Sunday, January 21st 2018, 10:20:00 AM. This section requires you to support conductors in panels to keep them in place. You're permitted to use wiring channels if they're made of a flame-retardant insulating material. If you're working with back-connected control panels, you must provide access doors or swing out panels that swing about a vertical axis. Multiple-device control panels must have terminal blocks or attachment plugs and receptacles to terminate and connect all outgoing control conductors.
By Severin Theodore. Engine Wiring. Published at Sunday, January 21st 2018, 06:37:26 AM. Let’s say you attempt to start your tractor and your starter does not engage. No click of the solenoid, nothing happens at all. Before assuming your starter is bad, grab your DMM and set it to DC Volts. Remove the wire going to the small terminal of your starter solenoid and connect the red probe of your DMM to the wire. Now connect your black probe to a ground. Turn your tractor’s key. Your DMM reads no voltage. This tells you that power is not going from your battery to the solenoid. Next remove the wires from the back of your ignition switch that are connected to the “B” and “S” terminals on your switch. Set your DMM to Continuity and connect your probes to the “B” and “S” terminals of the switch. Turn your tractor’s key and if there is no “beep” you know your ignition switch has a short internally and should be replaced.
By Charline Rodrigue. Engine Wiring. Published at Sunday, January 21st 2018, 06:08:32 AM. Measuring voltage is one of the most common tests a tractor mechanic will conduct as he troubleshoots a system. The presence of the correct voltage will determine if a component is functioning correctly or not. A common voltage test will be of the battery. A healthy battery should read about 12.5 volts, and a battery that is being charged should measure between 13 and 14.5 volts.
By Claudie Ulysse. Engine Wiring. Published at Sunday, January 21st 2018, 02:18:55 AM. The air-cooled design and splash oil system works, and it keeps it simple. Less parts means easier to rebuild and keep running for another 50 years. The Cast Iron Block, combined with a great bearing system, cooling, and lubrication system makes the Kohler K Series Engine a great engine.
D-42 - Engine Wiring Diagram Specialist
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.